Patterned Conveyor Belt

Home>PRODUCTS > Patterned Conveyor Belt >
Pattern Conveyor Belt

Pattern Conveyor Belt

It is inclination angle conveyor belt composed of working surface patterned cover rubber, nonworking surface cover rubber and carcass According to different cover rubber properties, they are classified into different types of conveyor belts ...

Product description

It is inclination angle conveyor belt composed of working surface patterned cover rubber, nonworking surface cover rubber and carcass According to different cover rubber properties, they are classified into different types of conveyor belts

Product specifications


The physical and mechanical properties:
1. The physical and mechanical properties of covering layer: please refer to the physical and mechanical properties of the common conveyor belt.
2. Tensile property of through thickness:
a. The longitudinal tensile strength is not lower than the following nominal value:
315 400 500 600 630 800 900 1000N/mm
b. The through thickness elongation rate of the belt should not less than rate of trough thickness of the belt should no more than 4%.
c. Straightness: no more than 25mm.





Specifications:
Made of EP fabric,SBR/NBR/EPDM rubber,high tensile strength, abrasion/oil/heat/wear resistant, pattern belts is available. 
 
Quality Standard : 
DIN22102, RMA, AS1332, SABS1173/2000, IS1891,BS490,JISK6322
 
Quality Control : 
We have one professional QC team checking the surface quality for every order.
We have our own testing lab double checking the inside quality
 
Specifiction/strength:
160N/mm-3150N/mm
 
Width:
400mm-2400mm
 
Spec:
Made of EP fabric,SBR/NBR/EPDM rubber,high tensile strength, abrasion/oil/heat/wear resistant, pattern belts is available.



Standards Cover Rubber Adhesion
  Tensile Strength Elongation at
break
Abrasion Cover to Ply Cover to Ply
DIN 22102 Mpa % mm3 N/mm N/mm
        (<=1.5mm) (>1.5mm)
DIN 22102-Z 15 350 250 3.5 4.5
DIN 22102-W 18 400 90 3.5 4.5
DIN 22102-Y 20 400 150 3.5 4.5
DIN 22102-X 25 450 120 3.5 4.5
Standards Cover Rubber Adhesion
  Tensile Strength Elongation at
break
Abrasion Cover to Ply Cover to Ply Ply to Ply
AS 1332 Mpa % mm3 N/mm N/mm N/mm
        (<=1.9mm) (>1.9mm)  
AS 1332-N17 17 400 200 4 4.8 6
AS 1332-M24 24 450 125 4 4.8 6
Standards Cover Rubber Adhesion
  Tensile Strength Elongation at
break
Abrasion Cover to Ply Cover to Ply Ply to Ply
RMA Mpa % mm3 N/mm N/mm N/mm
        (<=1.6mm) (>1.6mm)  
RMA-I 17 400   3 4.4 4
RMA-II 14 400   3 4.4 4
Standards Cover Rubber Adhesion
  Tensile Strength Elongation at
break
Abrasion Cover to Ply Cover to Ply Ply to Ply
SANS 1173 Mpa % mm3 N/mm N/mm
A 18 400 70 5 7
C 20 400 150 5 7
M 25 450 120 5 7
N 17 400 150 5 7
 
Fabric specs Ply thickness (mm/P) N/mm Cover thickness
Strength series
2 ply 3 ply 4 ply 5 ply 6 ply Upper Bottom
EP-80 0.8 160 240 320 400 480    2.0~8   0~4.5
EP-125 0.85 250 375 500 625 750
EP-150 0.9 300 450 600 750 900
EP-160 0.9 320 480 640 800 960
EP-200 1.05 400 600 800 1000 1200
EP-250 1.25 500 750 1000 1250 1500
EP-300 1.35 600 900 1200 1500 1800
EP-350 1.5 - 1050 1400 1750 2100
EP-400 1.8 - - 1600 2000 2400
EP-500 2 - - 2000 2500 3000
             
 

Application examples

Similar products

  • Patterned Conveyor Belt Patterned Conveyor Belt
  • Chevron Conveyor Belt Chevron Conveyor Belt
  • Pattern Conveyor Belt Pattern Conveyor Belt
  • Chevron Patterned Conveyor Belt Chevron Patterned Conveyor Belt