Patterned Conveyor Belt

Home>PRODUCTS > Patterned Conveyor Belt >
Patterned Conveyor Belt

Patterned Conveyor Belt

Quality Standard : DIN22102, RMA, AS1332, SABS1173 2000, IS1891,BS490,JISK6322...

Product description

Quality Standard : DIN22102, RMA, AS1332, SABS1173 2000, IS1891,BS490,JISK6322

Product specifications


The physical and mechanical properties:
1. The physical and mechanical properties of covering layer: please refer to the physical and mechanical properties of the common conveyor belt.
2. Tensile property of through thickness:
a. The longitudinal tensile strength is not lower than the following nominal value:
315 400 500 600 630 800 900 1000N/mm
b. The through thickness elongation rate of the belt should not less than rate of trough thickness of the belt should no more than 4%.
c. Straightness: no more than 25mm.


Quality Standard : 
DIN22102, RMA, AS1332, SABS1173/2000, IS1891,BS490,JISK6322


Specifications:
Made of EP fabric,SBR/NBR/EPDM rubber,high tensile strength, abrasion/oil/heat/wear resistant, pattern belts is available. 
 
Standards:
GB/T7984-2001, GB/T10822-2003, DIN22102, AS1332,JISK6322 etc


Specifiction/strength:
160N/mm-3150N/mm
 
Width:
400mm-2400mm
 
Spec:
Made of EP fabric,SBR/NBR/EPDM rubber,high tensile strength, abrasion/oil/heat/wear resistant, pattern belts is available.


Standards Cover Rubber Adhesion
  Tensile Strength Elongation at
break
Abrasion Cover to Ply Cover to Ply
DIN 22102 Mpa % mm3 N/mm N/mm
        (<=1.5mm) (>1.5mm)
DIN 22102-Z 15 350 250 3.5 4.5
DIN 22102-W 18 400 90 3.5 4.5
DIN 22102-Y 20 400 150 3.5 4.5
DIN 22102-X 25 450 120 3.5 4.5
Standards Cover Rubber Adhesion
  Tensile Strength Elongation at
break
Abrasion Cover to Ply Cover to Ply Ply to Ply
AS 1332 Mpa % mm3 N/mm N/mm N/mm
        (<=1.9mm) (>1.9mm)  
AS 1332-N17 17 400 200 4 4.8 6
AS 1332-M24 24 450 125 4 4.8 6
Standards Cover Rubber Adhesion
  Tensile Strength Elongation at
break
Abrasion Cover to Ply Cover to Ply Ply to Ply
RMA Mpa % mm3 N/mm N/mm N/mm
        (<=1.6mm) (>1.6mm)  
RMA-I 17 400   3 4.4 4
RMA-II 14 400   3 4.4 4
Standards Cover Rubber Adhesion
  Tensile Strength Elongation at
break
Abrasion Cover to Ply Cover to Ply Ply to Ply
SANS 1173 Mpa % mm3 N/mm N/mm
A 18 400 70 5 7
C 20 400 150 5 7
M 25 450 120 5 7
N 17 400 150 5 7
 

Application examples

Similar products

  • Patterned Conveyor Belt Patterned Conveyor Belt
  • Chevron Conveyor Belt Chevron Conveyor Belt
  • Pattern Conveyor Belt Pattern Conveyor Belt
  • Chevron Patterned Conveyor Belt Chevron Patterned Conveyor Belt